Problems that may be encountered in the daily use of hammer mill wood crusher

Problems that may be encountered in the daily use of hammer mill wood crusher

Hammer mill wood crusher may encounter some failures or problems during our daily operation and production operations, because many users may only understand the operation but are not very clear about troubleshooting, and they are often in a hurry and do not know what to do. How to deal with it, such as the problem of overheating of the motor during the production process of the hammer mill wood crusher. You must know that the motor is the source of the driving force for the wood hammer mill. It will directly affect the development of subsequent production plans, which is also directly related to the economic benefits and income of wood crusher users. In order to avoid this problem, let us Fanda Machinery Factory give you some tips today.

First of all, before we operate the wood grinder for production operations, we must adjust the tightness of its V-belt. If the V-belt is too tight, the bearing in the motor of the wood grinder will continue to heat up during the operation of the wood grinder, resulting in overheating. If it is too loose, it will cause the V-belt to slide and cannot transmit the crushing force to each component, which will directly affect the overall output and crushing efficiency of the wood grinder. Therefore, when we need to adjust the length of the V-belt, we can adjust the fixed machine base Loosen the bolts, use the adjusting bolts to change the position of the motor on the slideway, and then tighten the fixing bolts after the V-belt reaches the required length; and if the wood shredder uses the motor as the driving force, it should be noted that the power cord should not be too long. Moreover, there should be no winding, which very easy to causes Undervoltage or undercurrent of the motor. The direct performance of the Undervoltage or undercurrent of the motor is that the motor heats up or burns out.